WP-6 Shiplap Moulding 5-7/16"

This WP-6 log cabin shiplap siding molding 5-7/16" measures 5.437" wide by 1.500" thickness, necessitating the use of eight quarter lumber for milling on an industrial style molder. The beautiful detail consists of a 1-1/4" wide flat line segment on the left, 1/2" of this line will be hidden in the rabbeted area on the opposite side of the board when installed, connected to a 4-3/16" wide 2-13/16" radius arc with a 1/2" wide by 1/2" tall rabbet on the backside of the lumber. When two pieces of milled lumber are joined together they will simulate log cabin siding with a 3/4" wide sunk fillet, this leaves a total of 4-15/16" exposure on the face side of the merged boards.

Looking for that special pattern to enhance the architectural style of your current project, send us a sketch; custom profile design is our specialty. Experience the beauty we can create together from your outlined ideas and our vast knowledge of the woodworking industry.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 5.437" / Depth of Cut = 1.052" (top knives.)

Thickness = 1.500" / Depth of Cut = .500" (left cutters).