Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Base Moulding 6-1/2" - 9

Base Moulding 6-1/2" - 9

This beautifully large baseboard moulding 6-1/2" - 9 measures 6.500" wide by .625" thickness, the acrylic template is designed for producing eight inch wide knives. The elegant profile is composed of a 3-25/32" wide horizontal line with two offset 5/16" wide recessed beads, connected to a 9/16" radius scotia with a beveled edge that transitions into a 1-1/64" wide convex arc, attached to a 3/8" wide line segment and a 13/64" cove with a 3/64" eased edge leaving a 11/64" thickness dimension at the top of the pattern. We offer another similar profile in the same width for your review and consideration, this one has slightly different inner dimensions and geometrical shapes, baseboard 6.500" - 11. Browse our backout category for a suitable relief cut for this detail, we’re confident you will find a functional design to suit your needs.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Review our article on the importance of having the profile grinder level, this commentary will insure prolonged use of your machinery while maintaining consistent perfection when grinding cutters.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 6.500" / Depth of Cut = .594" (top knives) & .062" (bottom cutters.)

Molding Knife Calculator

Moulding Size
(inches)

fraction
/

Depth of Cut
(inches)

fraction
/

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.