Bed Mould 3-3/16" - 1

This 3-3/16" - 1 supporting bed mould measures 3.187" wide by .750" wide. The design consists of a quarter-round bead on top, a vertical fillet in the center, and a cavetto at the bottom right side. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 2-5/8" tall with a 1-57/64" projection across the top. The pattern measures 3.187" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 3-7/16" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.

Two high points in the design are intentionally positioned on the same plane; this feature will enhance the hold-down capabilities during milling.