Chair Rail Moulding 2-1/2" - 22

This lavish chair rail molding 2-1/2" - 22, measures 2.500" wide by .625" thickness, authorizing the pattern to be milled out of four-quarter lumber. The sumptuous profile is composed of a 1/4" cove and a 1/16" wide flat line segment on the top left, joined to a free-flowing three tangent radii s-shaped curvature with a beveled edge in the center. Attached to 1/16" wide sunk fillet and a tear-drop shaped bead with a 5/32" horizontal line, leaving a 3/16" thickness dimension on the right side of the design. Explore our backout category for an appropriate relief cut for the bottom of this detail, we’re confident you will find a suitable design to match your needs.

Our purple colored ceramic blend grinding wheel hogging at 2000 rpm with a twenty-five-degree back clearance angle will rough grind a set of high-speed steel cutters in a minimal amount of time. Also, review our article on the importance of having the profile grinder level, this commentary will ensure prolonged use of your machinery while maintaining consistent perfection when manufacturing cutters.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 2.500" / Depth of Cut = .475" (top knives) & .062" (bottom cutters).