Cove Moulding 4-3/32"

This incurved cove molding 4-1/32" measures 4.093" width by 1.062" thickness, necessitating the use of five quarter lumber for milling sprung (laying horizontally flat) on a commercial-grade molder. The terminating concave detail contains a 1/2" vertical line segment on the top left. The fillet connects to a 2-1/4" cove with a 5/8" horizontal flat on the design's bottom right side. The set spring angles are at thirty-four & fifty-six degrees; these dedicated back bevels come with the downloadable dxf file, they keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-3/8" tall with a projection of 3-3/16" across the top.

Proper tool balance is incredibly significant to your current molding operation. Read how critical it is to have balanced knives, screws, gibs in the cutter head. The is also information on the problems it can create if you neglect to focus on this simple task. Protect your current woodworking machinery; your clients will appreciate the wood molding quality and your disciplined manufacturing approach.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Width = 4.093" / Depth of Cut = .678" (top knives).

Thickness = 1.062" / Depth of Cut = .625" (right blades) & 1.000" (left cutters).