Crown 1-1/2"

This small 1-1/2" decorative crown mould measures 1.500" wide by .625" thickness. The lovely profile is comprised of an 11/64" vertical line connected to a 17/32" radius cove in the upper portion, joined to a miniature 5/32" horizontal line in the center that's attached to a small ogee with an 11/64" broad horizontal line at the bottom. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 1-1/16" tall and wide.

Three high points in the detail were deliberately positioned on the same plane; our specialized design features will assure excellent hold-down conditions while milling this detail if the moulder pressure shoe is parallel to the bed plates.