Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 1-9/16" - 1

Crown Moulding 1-9/16" - 1

This old-world crown moulding 1-9/16" - 1 measures 1.562" wide by .500" thickness. The colonial profile is comprised of a two tangent radius cyma recta in the center, flanked by a 5/32" vertical line on top and a 3/32" vertical line below, attached to a 7/32" radius cove and a 1/8" wide horizontal line at the bottom of the design. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 1-3/32" tall with a projection of 1-1/8" wide. Two high points in the detail were deliberately positioned on the same plane, our knowledgeable design features will assure excellent hold down conditions while milling this detail, providing the pressure shoe is parallel to the machine's bed plates.

Need this profile template and a set of moulding knives quickly? We generally can have these cutters ground with any one of our premium quality high speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several different architectural eras, there are literally thousands of compelling designs to help match your creative style.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 1.562" / Depth of Cut = .216" (top knives).

Thickness = .500" / Depth of Cut = .404" (right blades) & .374" (left knives), the same template can be used to make both sets of side cutters.

Molding Knife Calculator

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$40.00
$40.00
$40.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file”, please send $5.00 via PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.