Crown 1-3/4" - 9

This symmetrical 1-3/4" - 9 crown mould measures 1.765" width by .750" thickness, requiring a 2" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The ovolo-shaped terminating profile comprises a one-inch radius convex semicircular arc in the center. The arch is flanked by a 1/4" by 1/4" set of perpendicular lines on both the design's top left and bottom right corners. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 1-1/4" tall with a 1-1/4" projection across the top.

Look for a few other profile designs for different rooms in your beautiful, stylish home, with over 15,000 patterns in our search by size molding catalog there is something for everyone's creative architectural style. Utilize our manufacturers map listed by states to help you locate a mill in your area to produce any of our attractive profiles.