Crown 1-7/8"

This ovolo-style 1-7/8" crown mould measures 1.875" wide by .750" thickness. The terminating profile is composed of a 7/16" tall by 1/8" wide squared lines at the top, connected to a 1-7/8" radius semicircle in the center with a 3/16" tall by 1/4" wide squared lines at the bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 1-1/2" tall with a projection of 1-1/8" wide.

The center is the hold-down point for this detail. While milling, we suggest using a felt-lined pressure shoe to help eliminate any unsightly burnish mark the machine's metal pressure element may cause. Read our commentary about axial constant positioning for crown bevels. The article will help you dial this profile in axially on the first try when milling this detail, provided the machine is axially calibrated.