WM 67 Crown 2-1/4" - 24

This 2-1/4" - 24 WM 67 crown mould measures 2.250" in width by .562" in thickness. The elegant terminating profile comprises three tangent radiuses creating the cyma recta in the center. It's connected to a 3/32" tall by 1/8" broad notch joined to a 9/32" vertical line on the top left. The lower portion consists of a 13/64" radius cove flanked by a 3/32" vertical and a 5/32" horizontal line on the design's bottom right corner. The spring angles are fixed at forty-five degrees; these specific bevels set the installed height and projection at identical dimensions of 1-19/32" tall and across the top. The suggested rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 2-1/2" wide.

Review our commentary about axial constant positioning for crown bevels. The article will help you dial this profile in axially, provided the machine is adequately calibrated . Two high points in the pattern layout are deliberately positioned on the same plane. Our disciplined design features will assure excellent hold-down conditions while milling as long as the pressure shoe is parallel to the machine bed-plates.

The current combined high-speed knife steel & template prices are listed below for quoting purposes. You may only need knives for a specific cutter head on the itemized costs, saving money by employing knives you already own. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of profiles.