This Symmetrical Crown Moulding 2-17/32" - 2 measures 2.531" wide by .562" thickness with a .265" depth of cut on both the right and left vertical cutters, and a .375" depth of cut on the top horizontal profile knives.
The even design is comprised of a 7/8" radius cavetto in the center, attached to a 23/64" by 15/64" tall and wide notched fillet, joined to a 5/16" vertical fillet on top and a 5/16" wide horizontal line at the bottom. The spring angles are fixed at forty-five degrees, these specific back bevel cutters set the installed height and projection at an identical dimension of 1-25/32" tall and wide. Two high points in the detail were deliberately positioned on the same level plane, our disciplined design practices will assure superior hold down conditions while milling the detail on an industrial moulder providing the moulder pressure shoe is set parallel to the bed plates.
Architects, interior designers, lumber mills, and moulding manufacturers have been utilizing our vast variety of creative designs for years, we trust you will find that special profile to enhance the architectural style of your home. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.
Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%
1588 South 250 East | Kaysville, Utah 84037
Phone/Fax: 801-451-5987
Moulding Catalog Updated Thursday, October 3, 2024
© Copyright 1997 - 2024 Mirror Reflections Inc. All Rights Reserved.