Crown 2-21/32"

This small concave crown moulding 2-21/32" measures 2.665" width by .750" thickness, permitting a 2-15/16" wide blank of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial moulder. The attractive terminating profile contains a 7/32" vertical line joined to a 5/32" by 5/32" notch on the top left. The cut-out connects to a 1-3/16" cove in the center; attached to a 5/16" radius ovolo bordered by a 3/32" horizontal line above, and a 1/8" tall by 11/64" wide perpendicular lines on the design's bottom right corner. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; in addition to locking in the height at 2-1/16" tall with a 1-11/16" projection across the top.

Are you looking for that unique moulding to enhance the architectural style of your current project? Please send us a sketch; custom profile design is our specialty. Experience the elegant beauty we can create; from your outlined idea concepts and our vast knowledge of the woodworking industry.

For knife quoting purposes, click the calculator below; we supplied the important measurements; please insert the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, feel free to print a copy of our fraction - decimal - millimeter chart, place it on the machinery around the shop to help operators save time and increase accuracy during setup procedures.

Width = 2.687" / Depth of Cut = .313" (top knives).

Thickness = .750" / Depth of Cut = .497" (right blades) & .736" (left cutters).