Crown 3" - 24

This beautiful 3" - 24 crown mould measures 3.000" wide by .750" thickness, enabling the detail to be milled sprung (laying horizontally flat) out of four-quarter lumber. The lovely profile is comprised of a one-inch cove in the center, attached to a 1/4" ovolo on top, the lower portion consists of a 1/4" radius arc joined to a two tangent radius ogee with a 5/32" broad horizontal line on the bottom of the pattern. The spring angles are fixed at thirty-eight and fifty-two degrees, these dedicated back bevels set the installed height at 2-3/8" tall with a projection of 1-27/32" wide. We offer two larger versions of this style pattern for your review and consideration, crown molding 4.000" - 9 and crown 6.000" - 3.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process, the knives will be capable of milling some of the finest quality architectural millwork you have ever produced.