Crown 3-3/16"

This beautiful 3-3/16" terminating crown mould comprises a 3/8" tall vertical line on the top left. It's connected to a 2-3/16" concave semicircle in the center, merged with a 1/4" by 1/4" perpendicular notch with a 3/8" flat area on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 2-1/4" tall with a 2-1/4" projection across the top. The pattern measures 3.182" in width by .625" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 3-7/16" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.