Crown 3-1/4" - 12

This opulent 3-1/4" - 12 crown mould measures 3.270" in width by .687" in thickness, allowing a 3-1/2" wide blank of four-quarter lumber for machining sprung (laying horizontally flat) on an industrial moulder. On the top left, the attractive supporting profile comprises a 21/64" quarter round and a 7/64" vertical line segment. The center retains a 2-3/16" concave semicircle attached to a tear-drop-shaped bead with a 3/16" tall line merged with a notch and a 3/16" horizontal line segment on the bottom right. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 2-5/16" tall with a 2-5/16" projection across the top.