Crown 3-1/4" - 33

This elegant 3-1/4" - 33 crown mould measures 3.270" width by .750" thickness enabling the use of four-quarter lumber for machining on an industrial-grade molder. The terminating custom profile contains a one-inch cove with 5/64" radius points in the center. The rounded points are flanked by a pair of cascading half circles with a 3/16" wide by 1/8" tall perpendicular line on the upper left and lower right side of the design. The set spring angles are at forty-five degrees; these dedicated back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 2-5/16" tall with a projection of 2-5/16" across the top.