Crown 3-9/32" - 1

This concave 3-9/32" - 1 crown mould measures 3.270" wide by .750" thickness allowing the detail to be milled from four-quarter lumber. The cove-shaped profile is composed of a 2-25/64" concave semicircle in the center, flanked by a 1/8" by 1/16" notch with a 1/4" tall vertical line on top and a 1/4" broad line at the bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height at 2-5/16" tall with a projection of 2-5/16" wide.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially provided the machine is properly calibrated. Two high points in the detail were deliberately positioned on the same plane; our disciplined design features will assure excellent hold-down conditions while milling, as long as the machine pressure shoe is parallel to the machine bed plates.