Crown 3-5/16" - 11

This exquisite 3-5/16" - 11 crown mould measure 3.315" width by .687" thickness, requiring a 3-9/16" wide blank of four-quarter lumber to mill sprung (laying horizontally flat) on an industrial moulder. The elegantly crafted supporting profile retains a 3/8" quarter-round convex arc joined to a 13/64" vertical line on the top left. The line connects to a one-inch concave semicircle tangent off a 7/32" convex arc in the center. The remaining portion retains a 3/16" tall by broad squared lines joined to a 1/8" tall fillet and 13/64" cove with a 13/64" broad flat line on the design's bottom right corner. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock in the installed height at 2-3/8" tall with a 2-5/16" projection across the top.

Custom-made elegance is a phrase used to define thousands of our moulding profile's beauty, style, and artisanship. Suppose you own a recently built house or older dated residence. In that case, we have the professional ability, knowledge, and experience to create visually stunning details to complement the architectural design of your elegant home and office.