WM 49 Crown 3-5/8" - 2

This WM 49 crown 3-5/8" - 2 measures 3.625" in width by .687" in thickness. The classic terminating profile comprises a two tangent radius cyma recta in the center, flanked by a 9/16" vertical line segment on the top left and a 5/16" tall vertical line below, connected to a 35/64" radius cove with a 15/64" broad horizontal line on the bottom of the design. The spring angles are at thirty-eight and fifty-two degrees; these particular back bevels keep the inner profile parallel to the wall and ceiling and set the installed height at 2-15/16" tall with a projection of 2-1/8" across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 3-7/8" wide.