Crown 4-1/16" - 10

This concave 4-1/16" - 10 crown mould measures 4.031" wide by .812" thickness, allowing the detail to be cut sprung (laying horizontally flat) out of four-quarter lumber. The asymmetrical terminating profile is comprised of a large 2-5/8" radius cavetto in the center, flanked by a 33/64" tall vertical line segment on top, the lower portion is comprised of a 5/16" tall half round bead with squared perpendicular steps at the bottom of the pattern. The spring angles are fixed at thirty and sixty degrees, these precise back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 3-1/2" tall with a projection of 2" across the top.