Crown 4-3/8" - 1

The elegant terminating crown moulding comprises a 2-7/32" radius cove in the center. In the upper left corner, it attaches to a 3/8" wide by 3/8" tall notch and a 3/8" vertical fillet. The lower right area of the design consists of a two-tangent radius cyma reversa/ogee flanked by small horizontal line segments. This specific 4-3/8" - 1 crown measures 4.375" in width by .750" in thickness. The spring angles are at forty-five degrees; the dedicated back bevels keep the face sides of the pattern parallel to the wall and ceiling. These specific angle positions lock the installed height at 3-1/8" tall with a 3-1/16" projection across the top. The recommended rough wood rip size is 4-5/8" wide, milling sprung (laying horizontally flat) using four-quarter lumber.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. You may only need blades for a specific cutter head on the itemized costs, saving money by employing knives you already own. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.