Crown 4-1/2" - 24

This creative 4-1/2" - 24 crown mould measures 4.500" wide by .812" thickness, permitting the pattern to be milled sprung (laying horizontally flat) out of four-quarter lumber. The custom terminating profile is comprised of a 7/16" tall vertical line segment on the top left, connected to a 3-15/16" radius cove in the center, joined to a 9/32" wide by 7/32" tall sunk fillet that transitions into a small two tangent radius cyma reversa with a 7/16" flat line on the bottom right side of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 3-1/64" tall with a projection of 2-13/16" across the top.