Crown 4-1/2" - 8

This stylish 4-1/2" - 8 terminating crown mould measures 4.500" wide by .750" thickness. The elegant profile is comprised of a 7/16" tall vertical line on top, connected to an 11/32" radius cove and a small notched fillet that transitions into a three tangent radius cyma reversa, attached to a 1/4" wide half circle flanked by beveled lines with an 11/32" horizontal line at the bottom of the design. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 3-3/16" tall and wide. Three high points in the detail were deliberately positioned on the same plane. This specialized design feature will assure excellent hold-down conditions while milling, providing the pressure shoe is parallel to the machine bed plates.

We have a similar profile with different a height and projections for your review and consideration, crown 4.500" - 36.