Crown 4-19/32" - 5

This delightful 4-19/32" - 5 supporting crown mould comprises a 1/2" quarter circle joined to a 9/64" tall vertical segment on the top left. Its attached to a 2-7/16" concave semicircle with a 1/4" wide line in the center, connected to a two tangent radius ogee with a 13/64" wide line segment on the bottom right corner of the pattern. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 3-19/32" tall with a 2-7/8" projection across the top. The pattern measures 4.601" in width by .687" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 4-7/8" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.