Crown 4-5/8" - 7

This elegant 4-5/8" - 7 crown mould measures 4.615" in width by .750" in thickness, allowing 4-7/8" wide blanks of four-quarter lumber for milling sprung (laying horizontally flat) on a commercial moulder. The beautiful terminating pattern contains a small two-tangent radius cyma recta flanked by vertical fillets on the top left. The lower vertical line connects to a 2-11/64" cove in the center. It merges with a 9/32" ovolo and an 11/32" cavetto with a 9/32" broad flat line on the bottom right side of the design. The backside fixed spring angles get set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 3-9/16" tall with a projection of 2-15/16" across the top.