Crown Mould 5-3/4" - 13

This creative 5-3/4" - 13 crown mould measures 5.750" wide by .750" thickness. The custom symmetrical profile comprises a 3-1/4" radius cove in the center, attached to a 3/8" tall and wide straight lines flanked by 7/64" angled sunk fillets, connected to a two tangent radius cyma recta/reversa on both the top and bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at an identical dimension of 4-1/16" tall and wide. We have a few other sizes in this crown design for your review and consideration, crown mould 4.250" - 15, crown mould 5.875" and crown mould 5.875" - 1.

Read our commentary about axial constant positioning for crown bevels, the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated. Three high points in the detail were deliberately positioned on the same plane, our specialized design features will assure excellent hold-down conditions while milling, providing the machine pressure shoe is parallel to the bed plates.