Door Cope & Stick Moulding 1-3/4" - 6

This beautiful interior door cope & stick moulding 1-3/4" - 6 measures 1.750" thickness, enabling the pattern to be machined out of eight quarter lumber, the width can be machined to any desired size within the parameters of the machinery used to cut the pattern. The fancy profile is composed of a 1/2" tall by 5/8" deep tongue & groove with a .008" void in the joint area for excess glue to escape from during assembly, flanked by a 5/8" concave semicircle, tangent to a 17/32" radius convex arc forming the elegant ogee, joined to a 1/8" vertical line segment on both face sides of the milled stile and rail. We offer an alternative profile with 1/8" more depth of cut in the design for your review and consideration, door cope & stick 1.750" - 31.

Try one of our 125% concentration ultimate CBN (cubic boron nitride) grinding wheels, finish grinding at 3000 rpm with a twenty-degree back clearance angle will create a superior micro edge on all your high-speed steel profile knives. Read this article or watch the videos to help better understand how to align a borazon wheel to axial constant position on a Weinig R960 profile grinder. During the machining process the knives will be capable of milling some of the finest quality architectural mouldings you have ever produced.

For moulding knife quoting purposes click to open the calculator below, we supplied only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions feel free to print a copy of our fraction - decimal - millimeter chart, place it on the molder, or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = 1.750" / Depth of Cut = 1.000" (male blades) & 1.004" (female cutters).