Shiplap Moulding 5-1/2" - 4

This beveled shiplap siding molding 5-1/2" - 4 measures 5.500" wide by .625" thickness, allowing the detail to be machined from four quarter lumber. The tapered profile is composed of a 4.105 degree angled line that transitions the thickness from 5/8" on the taller side to 1/4" on the thin side with a 3/32" round-over on each edge. The rabbet dimension is 1/2" wide by 1/4" tall, making the exposed face measurement of the lumber five inches wide when installed.

Review our commentary on custom made pressure shoes, this helpful step by step article will help you mill this profile to perfection. Did you know we design and grind knives for all the major brand names of machinery, including Weinig, Leadermac, Homag, Scmi, Diehl, Wadkin, Williams & Hussey, and more? Try our exceptional services; you'll be delighted with the results of all the beautiful profiles you manufacture, and they will surely be a cut above the rest.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 5.500" / Depth of Cut = .591" (top knives.)

Thickness = .625" / Depth of Cut = .500" (left cutters).