Shiplap Moulding 5/8"

This v-groove shiplap molding 5/8" measures random width by .625" thickness, permitting the use of four-quarter lumber for machining on an industrial molder. The dual-purpose profile contains a 5/16" wide by 5/16" tall tapered tongue merged with a 5/16" tall by 3/8" wide forty-five degrees chamfer on the opposite side. When two milled lumber pieces get joined, they create a 1/2" wide by 1/4" deep v-groove on one face side and a 1/16" channel on the opposing face. The knives are capable of milling 3/4" thickness as well.

Our professionally designed acrylic templates and knives include the required draft angles and blend areas to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Regardless if you own an industrial shaper or a Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech, or Homag molder, our precision cutters will mill flawlessly on them all.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = .625" / Depth of Cut = .624" (right blades) & .375" (left cutters).