Shiplap Moulding 11/16" - 7

This dual purpose shiplap siding molding 11/16" - 7 measures .687" thickness, widths are machined to any desired size within the limits of the molder or shaper used to mill the pattern. The double-sided profile can be installed either as a nickel board or a 1/2" wide v-groove face. The profile is composed of a 1/2" lap joint on the male side and a 5/8" lap on the female side. Which creates the 1/8" wide channel on one side, the opposing side consists of a 1/4" wide by 1/4" deep chamfered edge. When two pieces of milled lumber are joined together, they create a 1/2" wide by 1/4" deep decorative v-shaped groove. We offer a couple of similar designs retaining the same 1/2" wide v joint for your review and consideration, shiplap siding .687" - 1 and shiplap siding .687" - 5.

Custom-made elegance is a phrase used to define the beauty, style and artisanship of thousands of our moulding designs. Whether you own a recently built house or older style residence, we have the ability, knowledge, and experience to create profiles that will complement the architectural decor of your elegant home or office.

For knife quoting purposes, click to open the calculator below; we have added only the important measurements; enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Thickness = .687" / Depth of Cut = .843" (right blades) & .625" (left cutters.)