Shiplap Moulding 3/4" - 12

This shiplap siding molding 3/4" - 12 measures .750" thickness, allowing the use of four quarter lumber for milling on a commercial molder; the width is milled to any desired size within the parameters of the machinery used to cut the detail. The decorative pattern contains a 1/2" wide by 3/8" tall rabbet on the right side. The opposite side retains a one-inch broad by 3/8" high notch. When joining two milled lumber pieces, they create a 1/2" wide by 3/8" deep channel between the merged boards.

Our professionally designed acrylic templates and knives include the required draft angles and blend areas to maintain the ability to sharpen the blades properly without modifying the detail, while simultaneously prolonging the milling time between sharpening. Whether you own an industrial shaper or a high precision molder like Weinig, Wadkin, Leadermac, SCM, Diehl, Northtech, or Homag molder; our professional cutters will mill flawlessly on them all.

For molding knife quoting purposes, click to open the calculator below; we supplied only the important measurements, enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. If you would like some assistance with the dimensions, print a copy of our fraction - decimal - millimeter chart, place it on the molder or around the shop to help machine operators save time and increase accuracy during setup procedures.

Thickness = .750" / Depth of Cut = .500" (right knives) & 1.000" (left cutters).