Bed Mould 2-1/4" - 7

This traditional bed mould 2-1/4" - 7" measures 2.264" width by .750" thickness permitting the use of a 2-1/2" wide blank of four-quarter lumber milling sprung (laying horizontally flat) on a commercial molder. The common supporting profile contains a 1-1/32" convex arc on the top left. The arc connects to a 7/64" vertical fillet in the center and a 35/64" cove with a 5/32" wide horizontal fillet on the design's bottom right side. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 1-3/4" tall with a projection of 1-7/16" across the top.