Cove Moulding 5-3/16" - 2

This asymmetrical cove moulding 5-3/16" - 2 measures 5.313" wide by 1.000" thickness. The concave profile is comprised of a 35/64" tall vertical line on top, connected to a 4.875" radius cove in the center, attached to a 1/2" wide horizontal line at the bottom of the design. The spring angles are fixed at forty-one and forty-nine degrees, these specific back bevels set the installed height at 4" tall with a projection of 3-1/2" wide. Two high points in the design were intentionally positioned on the same plane, our specialized design features will assure excellent hold down conditions while milling, providing the moulder pressure shoe is parallel to the machine bed plates.

Do you realize how important proper tool balance is to your current molding operation? Find out more on how critical it is to have perfectly balanced knives, screws, gibs in the cutter head, and the problems they create if you neglect to focus on these simple task. Protect your current investment of woodworking machinery, your clients will appreciate your disciplined approach in molding manufacturing.

For knife quoting purposes use the calculator below, we have added only the important measurements, just determine the cutters you need. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the moulder to help operators save time and increase accuracy during machine setup.

Width = 5.313" / Depth of Cut = .564" (top knives).

Thickness = 1.000" / Depth of Cut = .571" (right blades) & .735" (left cutters).