Crown 1-3/8" - 2

This small 1-3/8" crown mould consists of a 5/16" wide by 3/16" tall, stepped fillet on the bottom, and a 5/8" radius cavetto consumes the middle with a fillet on both sides of the cove, one horizontal, and one vertical. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 1" tall with a 15/16" projection across the top. The pattern measures 1.375" in width by .562" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 1-5/8" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.