Crown 1-1/2" - 3

This time-honored 1-1/2" - 3 crown mould measures 1.500" wide by .625" thickness. The classic profile is comprised of two tangent radiuses forming a cyma recta in the center, flanked by a 7/32" vertical line on top and an 11/64" tall line below, attached to a 7/32" radius cove with a 19/64" wide horizontal line at the bottom of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-1/8" tall with a projection of 1" wide.

Three high points in the detail were deliberately positioned on the same plane; our creative design features will assure excellent hold-down conditions while milling this detail, providing the pressure shoe is parallel to the machine's bed plates. Read our commentary about axial constant positioning for crown bevels; the article will help you dial this profile in axially on the first try when milling this detail provided the machine is axially calibrated.