WM 89 Cove/Crown 2" - 10

This 2" - 10 WM 89 cove/crown mould measures 2.000" in width by .563" in thickness. The classic terminating profile comprises a 1-5/32" radius cavetto in the center. It attaches to a 1/8" wide by 5/32" tall notch connected to a 9/32" vertical line on the top left. The bottom right corner retains a 3/16" broad line segment. The spring angles are fixed at thirty-eight and fifty-two degrees; these specific back chamfers set the installed height at 1-19/32" tall with a projection of 1-7/32" across the top. We have a slightly larger version of this design for your review and consideration, crown 2.250" - 20. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 2-1/4" wide.

Need this profile template and a set of profile knives quickly? We generally can have these cutters ground with any one of our premium quality high-speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several architectural eras; thousands of compelling designs help match your creative style.

Need this profile template and a set of profile knives quickly? We generally can have these cutters ground with any one of our premium quality high-speed steels or carbide and shipped within twenty-four hours. We have artistic profiles from several architectural eras; thousands of compelling designs help match your creative style.

The current combined high-speed steel knife & profile template prices are listed below for quoting purposes. You may only need blades for a specific cutter head on the itemized costs, saving money by employing knives you already own. Most of our crown designs utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.