WM 51 Crown 3-1/4" - 1

This WM 51 3-1/4" - 1 crown mould measures 3.250" in width by .688" in thickness. The traditional terminating profile composes a two-tangent radius cyma recta in the center. It's flanked by a 9/16" vertical line on the top left and a 1/4" tall line below. The lower portion is attached to a 35/64" cove with a 13/64" broad horizontal line on the design's bottom right corner. The spring angles are fixed at thirty-eight and fifty-two degrees; these devoted back bevels set the installed height at 2-41/64" tall with a projection of 1-29/32" across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 3-1/2" wide.

Two high points in the design were intentionally positioned on the same plane; our specialized design features will assure optimal hold-down conditions while milling the pattern on an industrial machinery. Need this profile template and a set of knives quickly? We generally can have these cutters ground with any one of our premium quality high-speed steel or carbide and shipped within twenty-four hours.

The current combined high-speed steel knives & template prices are listed below for quoting purposes. Although all the prices are listed, you may only need knives for a specific part of the detail, saving your clients money using cutters you already own. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of profiles.