Crown 3-7/16" - 6

This eye-appealing 3-7/16" - 6 crown mould measures 3.446" wide by .750" thickness, allowing the pattern to be machined sprung (laying horizontally flat) out of four quarter lumber. The aesthetic terminating profile is composed of a 5/16" tall vertical line on the top left, joined to a small two tangent radius cyma recta and a 9/64" tall line transitioning into a 1-5/32" cove in the center, attached to a 33/64" radius ovolo with a 9/64" wide flat line above and a 5/16" wide horizontal line on the bottom right side of the design. If you want to install the pattern upside down, it becomes a supporting profile. The spring angles are fixed at forty-five degrees . These explicit back bevels keep the inner profile parallel to the wall and ceiling, they also set the installed height at 2-7/16" tall with a projection of 2-7/16" wide. We offer a larger 4-3/4" version of this beautiful design for your review and consideration, crown 4.750" - 22.