Crown 4-3/8" - 11

This attractive 4-3/8" - 11 crown mould measures 4.375" wide by .687" thickness, permitting the detail to be milled sprung (laying horizontally flat) out of four-quarter lumber. The graceful terminating profile is composed of a 27/64" tall vertical segment at the top left, connected to a 9/64" wide by 3/16" tall perpendicular notch that joins to a two tangent radius cyma recta with a 15/64" vertical line in the center, attached to another smaller cyma recta with a 13/64" tall by 7/16" broad squared lines at the bottom of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these particular back bevels keep the inner profile parallel to the wall and ceiling as well as setting the installed height at 3-25/64" tall with a projection of 2-49/64" wide.