Crown 5" - 34

This beveled 5" - 34 crown mould measures 5.000" wide by .813" thickness, enabling the detail to be milled sprung (laying horizontally flat) out of four-quarter lumber. The symmetrical profile is composed of a 3-37/64" wide forty-five-degree splay faced angled line in the center, flanked by two 15/32" line segments leaving a 17/32" tall and wide line at the top and bottom of the design. The spring angles are fixed at forty-five degrees, these dedicated back bevels set the installed height and projection at an identical dimension of 3-17/32" tall and wide. We offer a couple of similar but slightly smaller profiles with a three-and-one-half-inch height and projection for your review and consideration, crown 4.950" and crown 4.950" - 1.

Become professionally efficient while searching over 16,000 patterns in our state-of-the-art moulding catalog. Watch the short video on the first page to find design ideas for your next woodworking project; we're sure you will locate the perfect embellished pattern to enhance the architectural style of your beautiful home or office.