Crown 5-1/4"

This standard 5-1/4" crown mould measures 5.250" wide by .750" thickness, permitting the detail to be machined out of four-quarter lumber. The traditional terminating pattern is one of the more widely used profiles in the industry. It comprises a 9/32" tall vertical line on the top left. Connected to a 1-3/8" concave semicircle tangent to a 1-9/16" radius arc, which forms the cyma recta in the center, joined to a 9/16" vertical segment and a 19/32" cove with a 21/32" flat line on the bottom right corner of the design. The fixed spring angles are thirty-eight and fifty-two degrees, these particular back bevels keep the inner profile parallel to the wall and ceiling as well as set the installed height at 3-15/16" tall with a projection of 3-1/2" wide.

The present-day combined high-speed steel knives & profile template prices are listed below for quoting purposes. In most of our crown, cove, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of patterns.