Crown 5-5/16" - 1

This traditional 5-5/16" - 1 crown mould measures 5.312" in width by .750" in thickness, permitting the use of 5-9/16" wide blanks of four-quarter lumber for milling sprung (laying horizontally flat) on an industrial molder. The elegant terminating profile contains an 11/16" vertical line segment on the top left. The short line connects to a two-inch radius concave semicircle tangent to a two-inch convex arc, forming the cyma recta in the center. The s-shaped curvature merges with a 9/16" tall by 13/32" broad set of perpendicular lines on the bottom right side of the design. The fixed spring angles are set at thirty-eight and fifty-two degrees; these particular back bevels keep the face side of the profile parallel to the wall and ceiling when installed; they also lock in the positioned height at 4-1/4" tall with a 3-3/16" projection across the top.

We offer many other patterns with similar design characteristics for your consideration; here is one you may want to review, crown 5.312" - 7.