Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 2-1/2" - 24

Crown Moulding 2-1/2" - 24

This small cyma recta crown moulding 2-1/2" - 24 measures 2.500" wide by .750" thickness. The graceful profile is composed of a 13/32" tall vertical line segment on top, connected to a 5/8" concave semicircle tangent off a 5/8" radius arc, creating the lovely cyma recta in the middle, joined to a 5/16" tall by 7/16" wide squared lines at the bottom of the detail. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 1-29/32" tall with a projection of 1-5/8" wide. We offer an similar profile in the same size width, with alternative inner dimensions for your review and consideration, crown molding 2.500" - 22.

Architects, interior designers, lumber mills and manufacturers have been utilizing our vast variety of creative designs for years, we trust you will find that special profile to enhance the architectural style of your client's home. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 2.500" / Depth of Cut = .424" (top knives.)

Thickness = .750" / Depth of Cut = .406" (right blades) & .529" (left cutters.)

Molding Knife Calculator

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$35.00
$35.00
$35.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase a copy of this template ready dxf file for creating acrylic templates to produce knives please send $5.00 via PayPal.Me/MirrorReflections we will email you the dxf file shortly after payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.