WM 52 Crown 2-3/4" - 4

This 2-3/4" - 4 WM 52 crown mould measures 2.750" in width by .563" in thickness. The colonial terminating profile comprises three tangent radiuses creating the cyma recta in the center. It connects to a 1/2" vertical line on the top left and a 7/32" tall line below. The lower portion connects to an 11/32" radius cove attached to a 3/16" broad line at the design's bottom right corner. The spring angles are fixed at thirty-eight and fifty-two degrees; these specific back bevel cuts set the installed height at 2-3/16" with a projection of 1-21/32 across the top. The recommended rough wood rip size for milling sprung (laying horizontally flat) using four-quarter lumber is 6-1/4" wide.

Proper tool balance is essential to your molding operation. Read how critical it is to have balanced knives, screws, and gibs in the cutter head. There is also information on the problems it can create if you focus on something other than this simple task. Protect your current woodworking machinery; your clients will appreciate the wood molding quality and your disciplined manufacturing approach.

The up-to-date combined high-speed steel knives & template prices are listed below for quoting purposes. Although all the prices are listed, you may only need knives for a specific part of the detail, saving you money using cutters you already have. On most of our crown designs, we utilize a full 2.375"/60mm cutter head for the back bevel angles to allow for multiple axial adjustments on a wide range of profiles.