Mr moulding knives logo
Copyright © Mirror-Reflections. All rights reserved.

Crown Moulding 4-5/8" - 10

Crown Moulding 4-5/8" - 10

This extravagant crown moulding 4-5/8" - 10 measures 4.625" wide by .813" thickness, the detail will require four quarter lumber for milling. The elegant profile is comprised of a 2-3/8" radius cove in the center, attached to a 1/2" tall vertical line at the top. The lower portion of the design consists of a 53/64" wide half round circle connected to a small 3/32" vertical line segment, joined to a 1/2" radius cove with a 7/32" radius bullnose at the bottom of the pattern. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 3-19/32" tall, with a projection of 2-15/16" wide.

We have a small family of similar style profiles with different widths, heights and projections you may want to review and consider for your current trim project, crown molding 3.250" - 10, crown 4.531" - 1, crown 4.625" - 9 and crown 6.500" - 3. Architects, interior designers, lumber mills and moulding manufacturers have been utilizing our vast variety of creative designs for years, we trust you will find that special profile to enhance the architectural style of your home. If you have any questions or concerns about knife grinding procedures for any of our profiles, please contact us, we would be honored to assist you.

For knife quoting purposes click to open the calculator below, we have added only the important measurements, just enter the appropriate dimension in the boxes provided. A brief detailed explanation on how to use the calculator is located here. Need some assistance with the dimensions? Print a copy of our fraction - decimal - millimeter chart, place it on the molder to help operators save time and increase accuracy during machine setup.

Width = 4.625" / Depth of Cut = .544" (top knives.)

Thickness = .812" / Depth of Cut = .403" (right blades) & .530" (left cutters.)

Molding Knife Calculator

Grade of Steel

Subtotal

$0.00
$0.00
$0.00

Custom Moulding Template

$40.00
$40.00
$40.00

Total
(Template & 2 Knives)

$0.00
$0.00
$0.00

Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%

To purchase this CAD generated, “template ready moulding dxf file”, please send $5.00 via PayPal.Me/MirrorReflections we will email you the precision drawing shortly after the payment is received.

Copyright © Mirror Reflections Inc. All rights reserved.