Crown 4-3/4"

This fancy 4-3/4" terminating crown mould comprises a 9/32" tall vertical segment joined to a 21/64" radius cove with a 9/32" tall, notched fillet in the upper left portion. It joins a two-tangent radius cyma recta in the center, with a 5/32" radius half-round bead flanked by angled lines and a 3/8" broad flat line at the bottom right corner of the design. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 3-43/64" tall with a 3-1/64" projection across the top. The pattern measures 4.750" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 5" wide.

We offer a wide range of similar style patterns in different widths and thicknesses for your review and consideration; here are just a few to look at, crown 4.750" - 2, crown mould 4.750" - 5, crown 4.813" - 3 and crown 5.750" - 16, alter the search parameters if you want to view other width options. The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.