Crown Mould 5-3/4" - 16

This beautiful 5-3/4" - 16 terminating crown mould comprises a 3/8" vertical segment joined to a 31/64" cove merged with a 21/64" wide by 13/32" tall notch on the top left. It's connected to a graceful two tangent radius cyma recta in the center with a 5/32" radius half round bead flanked by small angled lines with a 33/64" wide area at the bottom right side of the design. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4-7/16" tall with a 3-11/16" projection across the top. The pattern measures 5.768" in width by .750" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 6" wide.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.

We offer many patterns in this same style in different widths and thicknesses for your review and consideration, here are just a few to look at, crown mould 4.750", crown mould 4.750" - 2, crown mould 4.750" - 5, crown 4.812" - 3 and crown mould 5.500" - 46, alter the search parameters if you want to view other width size options.