This Admired Crown Moulding 4-61/64" - 12 measures 4.950" wide by .813" thickness with a depth of cut of .624" on both the right and left vertical profile knives, and a .532" depth of cut on the top horizontal moulding cutters. We have a whole family of similar profiles with different widths, heights, and projections you may want to review and consider, here are just a few of them for your review and consideration, crown moulding 3.000" - 30, crown 4.000" - 38, crown 7.250" - 10," crown 5.250" - 10, crown 4.250" - 33, and crown 4.500" - 1.
The symmetrical stylish profile is comprised of a 4-5/32" radius cove in the center, flanked by an ovolo consisting of a 1/4" radius flanked by small fillets with a 5/16" squared fillet on the top and bottom of the pattern. The spring angles are fixed at forty-five degrees, these specific back bevels set the installed height and projection at 3-1/2" tall and wide. Two high points in the design were intentionally positioned on the same plane, our specialized design features will assure excellent hold down conditions while milling the detail on an industrial moulder, providing the pressure shoe is parallel to the moulder bed plates.
Looking for that special custom moulding to enhance the architectural style of your current project, send us a sketch, custom moulding knife design is our specialty. Experience the beauty we can create together from your outlined moulding ideas and our vast knowledge of moulder tooling and machinery.
Note: If you’re experiencing trouble printing to Full Scale, Go to File, Print Preview. Change the “Shrink to Fit” option to 100%