Crown 5-1/2" - 25

This distinctive 5-1/2" - 25 crown mould measures 5.500" wide by .813" thickness, enabling the detail to be milled sprung (laying horizontally flat) out of four-quarter lumber. The gorgeous profile is composed of a 3/64" tall by 23/64" broad squared lines on top, connected to a shallow cyma reversa with a 13/64" horizontal segment that merges with a 1-21/32" cove in the center, attached to an 11/16" tall by 17/32" wide notch for a piece of decorative dentil or rope molding, joined to a 49/64" radius ovolo with a 5/16" horizontal line at the bottom of the design. The spring angles are fixed at thirty-eight and fifty-two degrees, these specific back bevels set the installed height at 4-7/16" tall with a projection of 3-3/8" wide. We offer a few similar styles of this design in the same width without the notch for your review and consideration, crown 5.500" and crown 5.500" - 15.