Crown 5-1/4" - 13

This distinctive 5-1/4" - 13 terminating crown mould comprises a 1-9/16" radius concave arc in the center. It's connected to a two-tangent radius cyma reversa flanked by horizontal fillets with a 31/64" tall vertical line on top. The fixed spring angles are at thirty-eight and fifty-two degrees; these particular back angles keep the face side of the profile parallel to the wall and ceiling when installed, in addition to locking in the height at 4" tall with a 3-13/32" projection across the top. The pattern measures 5.250" in width by .813" in thickness. The recommended rough wood rip-size milling sprung (laying horizontally flat) using four-quarter lumber is 5-1/2" wide. We offer a small collection of similar profiles of various size widths, heights, and projections for your review and consideration, crown mould 2.500" - 21, crown 3.000" - 6, crown 4.000" - 3, crown 5.437" - 3, crown 7.000" - 38, and crown 8.500" - 6.

The up-to-date combined high-speed steel knives & profile template prices are listed below for quoting purposes. On most of our cove, crown, and bed mould designs, we utilize a full 2.375"/60mm cutter head for the back cut angles to allow for multiple axial adjustments on a wide range of patterns.